Eyeball Fixture 2.0

The fixture for the prototype eyeball set up was great for working out the eyeball's movement axis location, how to hold it and how to connect it to the servo for software testing. But for the eyeball idea to work - IN the capsule - it had to be tilted back to parallel the sloping side of the capsule.

Another piece of MDF, the right sized Forstner bit, a little handsawing, a few more holes drilled and I had the support fixture for the eyeball. A little wire cutting, bending, threading through holes, some more wire bending and the Eyeball System was ready for testing before final installation.