Monday July 07, 2008

		Services
		Dial-Up Services Web Hosting AT&T Territory Home DSL AT&T Territory Business DSL Verizon Territory DSL Verizon Territory Business DSL T1 Service Co-Location Dedicated Servers Palace Hosting Domain Registration E-Commerce Consulting Other Services

This page will give you the basics in setting up CRT to let you telnet to a server.

Launch CRT
Everytime you launch CRT, you will get the Connect window.
Click the New button.
From the Session Preferences window:
- In the Name: field enter a name for the server you are telneting to.
  In this example we will enter shell.hypersurf.com
- Protocol: should be set to telnet
- Enter the proper hostname or IP address in the Hostname or IP: field.
  In this example we will enter shell.hypersurf.com
- The default telnet port is 23, but in some situation this could be different.
  In the Port: field enter the proper port, if you don't know what it is, leave it at 23
- The rest should be fine as default.
Click OK
Select the profile you would like to connect to and click OK to connect.

NOTE: If you need assitance in using your HyperSurf Internet UNIX Shell account refer to our FAQ's about Shell Access.

That's it!