Setting Up Netscape Communicator 4 / Windows

Configuration

1. Launch Netscape Communicator
   
2. Pull down the Edit menu and select Preferences...

   

3. In the Navigator category, under Home page in the Location field enter http://www.hypersurf.com/

   

4. Click the + next to Mail & Newsgroups then select Mail Servers
   If you have any servers listed in Incoming Mail Servers click on each then click Delete
   
   Click Add...
   In the Server Name field enter popd.hypersurf.com
   In the ServerType select POP3 Server
   In the User Name field enter your HyperSurf Internet username.
   Click OK

   

   In the Outgoing Mail Server section, in the Outgoing mail (SMTP) server field enter smtp.hypersurf.com and in the Outgoing mail server user name field enter your username.

   

5. At the left side under Mail & Newsgroups select Newsgroup Servers
   Under Newsgroup Servers if you have any listed, click on each and select Delete
   
   Click Add...
   In the Server tab enter news.hypersurf.com
   Click OK

   

6. Click + front of Composer
   Select Publishing
   
   In the Enter a FTP or HTTP site address to Publish to field enter ftp://ftp.hypersurf.com/home/users/u/username/www/
   NOTE: Where it says u repalce it by the first character of your username, and replace username with your HyperSurf Internet username.
   
   In If publishing to a FTP site, enter the HTTP address to browse to field enter http://www.hypersurf.com/~username/
   Note: Where it says username replace it with your HyperSurf Internet username

   

7. Click OK

Back to Technical Support FAQ's